X31010P：10 GE Copper port unmanaged commercial PoE Swicth

Technical Parameter
Standard:

IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE 802.3z、IEEE 802.3x、IEEE802.3ad、IEEE802.3af、IEEE802.3at、IEEE802.1q (VLAN Tagging)、IEEE802.1p(QoS)

Equipped with dip switch function
(Three digit dialing code)
Eight built-in working modes that can be selected online for gigabit switches:

① Standard mode, 

② Cross device QinQ isolation mode, 

③ Uplink port link aggregation mode

④ Based on downstream port VLAN isolation mode, 

⑤ forced 10M mode for electrical ports, 

⑥ cross device QinQ

Isolation+forced 10M mode for electrical ports, 

⑦ VLAN isolation based on downstream ports+forced 10M mode for electrical ports Mode:

 ⑧ The optical port is in high priority mode and the electrical port is in low priority mode.

Note: Customers can also customize other working modes of the switch according to their actual needs.

Service-port
Gigabit electrical port: 10 * 10/100Base-T/1000Base-TX (2 sets of 1 * 4 10/1000/1000M adaptive RJ45)
Power interface: DC power interface (DC head Φ 2.1mm)
POE power supply pins: 1/2 (+), 3/6 (-), port maximum/average power: 30W/15.4W

DIP DIP interface: online selection of different working modes for switch network communication

Distance
Twisted pair cable: 10BASE-T: Cat3,4,5 UTP cable (≤ 250 meters)

100/1000BASE-T (X): Cat5 or later UTP cable (≤ 100 meters)

Exchange attributes
Gigabit switch backplane bandwidth: 20G (non blocking)
Transmission method: Store and forward (full line speed)
Packet forwarding rate: 14.8Mpps
Mega frame: Supports 9216 bytes
MAC address table: 8K

Cache: 2Mbit frame cache

LED indicator light
Power indicator light: PWR (green light), interface indicator lights are as follows:
① The gigabit optical port has a green light indicating 1000M. (Above the power light)
② For the gigabit electrical port, when the yellow light is on, it indicates Link/ACT, and when the yellow light is off, it indicates link down status;
The yellow light is on and flashing, indicating that the port is in link up status and sending and receiving data;
③ POE port section (ports 1-8), green light indicates normal power supply connection;

Green light off indicates abnormal POE power supply;

External power supply
Power adapter (DC head ∮ 2.1mm output line length 1.2M)
Input: AC100~240v 50~60HZ
Output: DC52V/2.5A 130W

Standby power consumption:<1W; System full load power consumption:<130W

work environment
Working temperature range: -20~70 ℃
Storage temperature range: -40~85 ℃
Appearance dimensions (L * W * H): 191.6x96.86x30 (mm)

Net weight/gross weight: 0.2Kg

Installation method: desktop 

Previous：X3115P：1GE Fiber+5GE Copper unmanaged PoE commercial switch

Next：X31216P：16 Gigabit RJ45 copper + 2 Gigabit fiber Commercial PoE Switch